Table of Contents
Advertisement
Draw Mode (Layer 12, 13) / Bounce Mode (Layer 14)
Draw Mode Performance
In this mode you can press individual LED buttons or draw lines
or curves on the matrix, and those actions will be played back
and repeated. You can keep adding to your "composition" during
playback to build up thick sonic textures.
In the Draw Mode you cannot clear only a part of the performance.
The entire layer can be cleared by pressing the [CLEAR] button.
14
Bounce Mode Performance
Press an LED button and the light will "drop" from that button,
bounce back from the bottom of the matrix, and repeat. The
corresponding note will sound when the light bounces at the
bottom row. The higher the entry point, the longer the interval
between the sound. In the Bounce Mode the pitches are arranged
horizontally, like a piano, with the lowest pitch on the left and the
highest on the right.
Press the lowest LED button to
stop activity in that column.
Bouncing can be individually stopped in any column by simply
pressing the lowest LED button in that column.
Advertisement
Table of Contents
