Soaking; Bleaching; Decolorizing; Changing A Program - Bosch WFL 2090 Operating, Care And Installation Instructions Manual

Soaking

The Soak setting is used to pre treat heavily
stained items:
q Load laundry of the same color.
q Add detergent to chamber I according to the
manufacturer's specifications.
q Turn the program selector to Soak.
The ready light is flashing.
q Press the Start button.
The wash light comes on and the program
starts.
i The soak cycle lasts 2 hours with the tempera
ture held at 60 °F (15 °C)! It is ended with
a short spin cycle. All the water is pumped out.

Bleaching

d
WARNING
DO NOT use liquid chlorine bleach in this
washing machine.

Decolorizing

CAUTION
Decolorants may contain sulphur or chlorine.
These substances can cause parts of the
washing machine to corrode. Do not decolorize
items of laundry in the washing machine.

Changing a program

If you have accidentally selected the wrong
program:
q Turn the program selector to Off.
q Turn the program selector to the desired
program.
The ready light is flashing.
q Press the Start button.
The wash light comes on and the new program
starts.

Canceling an active program

If you wish to prematurely end a program:
q Turn the program selector to Off.
q Turn the program selector to Drain or Spin.
The ready light is flashing.
d
For Spin, select the desired spin speed
(but not no final spin).
q Press the Start button.
The wash light comes on and the program
starts.
17