Starting The Programme; Soaking Laundry; Adding Laundry; Cancelling The Programme - Bosch WGG244FNSN User Manual And Installation Instructions

Table of Contents

Advertisement

13.5 Starting the programme
Note: If the intelligent dosing system
is activated, make sure that the dis-
pensers have been filled → Page 32
and the basic dosage has been set
→ Page 33.
Requirement: A programme is set.
→ "Setting a programme", Page 30
Press
.
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows the programme
duration or the programme end
time.
a After the programme has ended,
the display shows: "End".
13.6 Soaking laundry
Note: No additional detergent is re-
quired for soaking. The appliance
uses the filled detergent for soaking
and washing.
Requirements
¡ The laundry is placed in the appli-
ance.
→ "Loading laundry", Page 30
¡ A programme has started.
→ "Starting the programme",
Page 31
Press
approx. 10 minutes after
1.
the programme start.
The programme pauses and the
laundry can soak.
Press
after the required soak-
2.
ing time.
13.7 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
Press
.
1.
The appliance pauses.
Note: If you want to add laundry,
follow the instructions on the dis-
play.
→ "Display", Page 21
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press
.
5.
13.8 Cancelling the pro-
gramme
Press
.
1.
Open the door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Sköljning (Rinse) pro-
gramme.
– If the water level is high, start
the Centrifugering (Spin) pro-
gramme or select a suitable pro-
gramme for draining.
→ "Programmes", Page 25
Remove the laundry. → Page 32
3.
13.9 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Requirements
¡ Rinse Stop is activated.
¡ The last rinse cycle of the set pro-
gramme has ended and the laun-
dry is in the rinsing water.
Set the Centrifugering (Spin) pro-
1.
gramme or a programme for drain-
ing the water.
→ "Programmes", Page 25
Press
.
2.
Basic operation en
31

Advertisement

Table of Contents
loading

Table of Contents