Soaking Laundry; Adding Laundry; Cancelling The Pro- Gramme; Resuming The Programme When The Programme Status Is Rinse Hold - Bosch WUU28T66ES User Manual And Installation Instructions

Table of Contents

Advertisement

a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows the programme
duration or the programme end
time.
a After the programme has ended,
the display shows: End.
13.9 Soaking laundry
Note: No additional detergent is re-
quired for soaking. The appliance
uses the filled detergent for soaking
and washing.
Requirements
¡ The laundry is placed in the appli-
ance.
→ "Loading laundry", Page 29
¡ A programme has started.
→ "Starting the programme",
Page 30
Press Inicio/Pausa + Carga 
1.
prox. 10 minutes after the pro-
gramme start.
The programme pauses and the
laundry can soak.
Press Inicio/Pausa + Carga 
2.
after the required soaking time.
13.10 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
Press Inicio/Pausa + Carga 
1.
The appliance pauses.
Note: If you want to add laundry,
follow the instructions on the dis-
play.
→ "Display", Page 21
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press Inicio/Pausa + Carga 
5.
13.11 Cancelling the pro-
Press Inicio/Pausa + Carga 
1.
Open the door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
– If the water level is high, start
the
suitable programme for draining.
→ "Programmes", Page 24
Remove the laundry. → Page 31
3.
13.12 Resuming the pro-
Requirements
ap-
¡ Rinse Stop is activated.
→ "Buttons", Page 22
¡ The last rinse cycle of the set pro-
gramme has ended and the laun-
dry is in the rinsing water.
Set the
1.
gramme for draining the water.
→ "Programmes", Page 24
Press Inicio/Pausa + Carga 
2.
13.13 Unloading the laundry
Open the door.
.
1.
Remove the laundry from the
2.
drum.
13.14 Switching off the appli-
Turn the programme selector to
1.
Turn off the tap.
2.
.
Basic operation en
gramme
programme.
programme or select a
gramme when the pro-
gramme status is Rinse
Hold
programme or a pro-
ance
.
.
.
31

Advertisement

Table of Contents
loading

Table of Contents