Dynamic Range - Yamaha RX-V367 Owner's Manual

■
Auto-adjusting Dolby Digital and DTS

dynamic range

D.Range
Selects the dynamic range adjustment method for audio bitstream
(Dolby Digital and DTS) playback.
Max (Default)
Produces audio without adjusting the dynamic range.
STD
Sets the standard dynamic range suitable for home
use.
Min
Sets the dynamic range at the lowest level for
playback. This is useful for low-volume audio.
■
Setting the maximum volume
Max Volume
Sets a maximum volume level so that the audio is not played too
loudly. The default setting of +16.5 dB produces the highest
volume.
Adjustable range -30.0 dB to +15.0 dB / +16.5 dB (Maximum volume)
Default setting +16.5 dB
Adjustment 5.0 dB
increments
J
1 : When you set the "Max Volume" at a lower level than "Init.Volume," the "Max
Volume" setting has priority.
J
2 :
When "TV" is selected, the speakers of this unit do not output sound.
■
Setting the startup volume
Init.Volume
Sets the initial volume for when this receiver is turned on. When
this parameter is set to "Off," the volume is set at the level when the
J1
receiver last entered standby mode.
Adjustable range Off, Mute, -80 dB to +16.5 dB
Default setting Off
Adjustment
0.5 dB
increments
■
Changing the output destination of HDMI
input audio signals
HDMI Audio Out
Choose whether to playback audio from an external component
such as a BD/DVD player connected via HDMI through this unit or
through a TV.
Amp (Default)
Outputs audio through this unit only. When this
setting is selected, the external component outputs an
audio format compatible with this unit.
TV
Outputs audio through a TV only. When this setting is
selected, the external component outputs an audio
format compatible with the TV.
Amp+TV
Outputs audio from the TV and this unit. When this
setting is selected, the external component outputs an
audio format compatible with this unit and TV.
J2
SETUP
Setting various functions (Setup menu)
41
En