FUNCTION BUTTONS
Stitch width adjustment buttons
When you select a stitch, the machine will auto-
matically set the recommended stitch width, which
will be indicated by numbers on the LCD screen.
The stitch width can be regulated by pressing the
stitch width adjustment buttons.
Certain stitches have a limited stitch width.
For a narrower stitch, press the left side of the
button "". For a wider stitch, press the right side
of button "+". The stitch width can be adjusted
between "0.0-9.0".
Certain stitches have a limited stitch width. (See
"
Stitch reference chart
When Group 2-B stitches 00-05, 27-29 and
Group 3-C stitches 00-02, 04, 18 and Group 4-D
stitch 50 are selected, the needle position is
regulated by the stitch width adjustment buttons.
Pressing the "" button (left), will move the needle
to the left and pressing the "+" button (right), will
move the needle to the right. The numbers will be
changed from left position "0.0" to extreme right
position "9.0". The pre-set center needle position
will be indicated as "4.5".
12
INSTRUCTIONS
Stitch width
adjustment buttons
Stitch length
adjustment buttons
Tension adjustment
buttons
Twin needle button
Mirror image button
Elongation button
Bobbin winding button
Key lock button
FUNC selection button
" on page 92.)