Function Buttons And Indicators; Reverse; Start/Stop; Speed Control Lever - Pfaff 260C Owner's Manual

Function buttons and indicators

1. Reverse

2. Start/stop

3. Speed control lever

4. Immediate tie-off/Tie-off

Reverse
If you press the reverse button while sewing, the
machine sews in reverse for as long as you keep the
button pressed.
Start/stop
Press this button to start or stop the machine without
using the foot control. Press the button once to start and
press it again to stop.
Speed control lever
The speed control lever sets the maximum sewing speed.
To increase sewing speed, slide the lever up, to decrease
sewing speed, slide the lever down.
Immediate tie-off/Tie-off
For immediate tie-off press the button while sewing. The
machine sews tie-off stitches immediately and stops
automatically. To set the machine to perform a tie-off at
the end of a stitch, press the button before starting to sew.
The LED light next to the button becomes lit. After
sewing the desired length of stitching, press the reverse
button while actively sewing. The machine will complete
the current stitch, tie-off and stop automatically.
Note: The tie-off function is not available for stitch 12.

5. Needle stop up/down

6. Stitch width or stitch positioning

7. Stitch length

8. Info button

Needle stop up/down
Press this button to move the needle up or down. The
setting of the needle stop position is changed at the same
time. You can also tap the foot control to raise or lower
the needle.
Stitch width or stitch positioning
Increase or decrease the stitch width using the "-" and
"+" buttons. For straight stitches, use the "-" and "+"
buttons to change the stitch position.
Note: There are 15 needle positions available. 3.0 on the
display is the center position.
Stitch length
Increase or decrease the stitch length using the "-" and
"+" buttons.
Info button
Press this button to show the presser foot
recommendation on the LED display.

Direct selection buttons

By pressing one of the 27 buttons you select the stitch
illustrated on that button immediately.
9. Direct selection buttons
21