Fu S; Nozzle - Val6 KBE5L Owner's Manual

7-1 . FU Se
.. . o . .. .. .
o .. . .. . . .
o .. . .. . . .. o . . . .
o . . . . o . . . . . . . . . . . . .
w
w
Unscrew two screws of burner cover and re-
move the burner cover.
Unscrew the screw cap of fuse holder and
take out the fuse.
Unscrew two screws and take
burner cover off
ffi
Replace with a new one.
ffi
Put the screw cap back into fuse holder.
Put the burner cover back with two screws
removed.
Open a screw cap and take out a fuse
Remove the nozzle using the nozzle wrench
provided as standard parts.
Replace with a new nozzle.
Tighten the nozzle using the nozzle wrench
until the nozzle is fixed.
Put the burner assembly back with three nuts
removed.
@
w*"
Check whether the
fuse is blown out
7-2. N O ZZ I@ .. .. .. . . .. .
o . . .. .. .. . .
o o . o o . . . . . o . . . . . . . . . . . . . . . . . . .
Observations
. Place the burner assemblv taken out within the reach of two fuel hoses.
Remove three nuts from burner attachment
bolts and take the burner assembly off.
Nozzle
Nut
Unscrew three nuts and take the burner off
w
w