Audiovox Prestige Platinum APS-998 Owner's Manual page 15

Note Engine can be started in many modes armed, disarmed,
valet, etc... The screen shown is Locked/Armed and running.
When Panic Mode has been activated and the system is
armed the vehicle's lights, the lock and the siren icon will
flash on the LCD screen. If the system is disarmed and the
Panic Mode is activated, the lights, siren, and the unlock icons will flash on the
LCD screen. If in text mode, the words Panic will flash on and off until the mode
times out and the next remote command is executed.
When ever the vehicle is operated from the two way transmitter, the unit will
locate this feature in the transmitter program section and set to vibrate. The
icons shown left will appear in the upper left of the screen.
If the alarm system has been triggered, the icon displayed on
the transmitter LCD will indicate which zone has been activated,
as well sound the beep tones, or vibrate dependent upon the
setting as shown above. The following trigger patterns will be
displayed.
Triggered and the entry attempt was made to one of the vehicle
Doors.
Triggered and entry attempt was made to the vehicles Hood
or
Trunk.
Triggered and entry attempt was made to the vehicles glass, or
the vehicle has been hit or bumped hard enough to cause a
response from the vibration detector.
ADDITIONAL ICONS THAT MAY BE DISPLAYED ARE:
If the arm/disarm chirp tones have been turned off at the vehicle,
when you arm, or disarm, the display will indicate this as shown
and there will be no arm/disarm chirps at the transmitter. This is
true if the transmitter is set for vibrate mode.
When the vehicle is armed, and a door is opened, or ajar, the transmitter will chirp
beep responsive to the function executed at the
vehicle. 1 beep when armed, 2 beeps when
disarmed, etc... at times It may be inconvenient
or too noisy to hear the beep tones, so the
system allows you to set the unit for vibrate
mode. To toggle on or off beep tones/vibrate,
Page 15
128-7404
15 of 24