Appliance Interior; Overview Of Menu; Water Softening System/Special Salt; Setting - Siemens SX SERIES Operating Instructions Manual

en

Water softening system/Special salt

Appliance interior

1" Interior light *
1* Top basket
12 Knife shelf *
1: Top spray arm
1B Tablet collecting tray
1J Intake opening
1R Blow opening (Zeolith container)
1Z Bottom spray arm
1b Dispenser for special salt
1j Filters
9" Cutlery basket
9* Bottom basket
92 Dispenser for rinse aid
9: Detergent dispenser
9B Lock for detergent dispenser
9J Rating plate
* depending on model

Overview of menu

The settings can be found in the
individual chapters.
Water Hardness :
Intensive drying :
Rinse aid :
Hot water :
End of programme buzzing sound
: - :
Automatic disconnection :
Optical display while the programme
is running :
* depending on model
10
- :
- :
- :
- : *
- :
– :
Water softening
system/Special salt
W a t e r n g s o f t e n i
To ensure good washing results,
the dishwasher requires soft water, i.e.
containing low amounts of lime,
otherwise white limescale will be
deposited on the utensils and inner
container.
Tap water above 1.2 mmol/l must be
softened. The water is softened with
special salt (regeneration
salt) in the water softening
system of the dishwasher.
The setting and therefore the required
amount of salt
depends on the degree of hardness of
your tap water (see table).

Setting

The amount of salt dispensed can be
set from : to :
Salt is not required at the set value
: .
1. Find out about the hardness value of
your tap water. Your water utility
company will help you with this.
2. Set value can be found in the water
hardness table.
3. Open the door.
4. Switch on ON/OFF switch (.
5. Hold down programme button #
and press START button ` until
: .... is indicated on the digital
display.
6. Release both buttons.
The LED for button # flashes and
the digital display h displays the
factory setting :
a l s y s t e m / S p e c i
.
.
s a l t