AEG SKD71813C0 User Manual page 10

10 www.electrolux.com
start to flash and the display is
blank.
2. Press
• The indicators
• The indicator
• The display shows the current
setting: e.g.
– The levels of rinse aid are from
– Level 0 = no rinse aid is
3. Press
the setting.
4. Press the on/off button to confirm the
setting.
6.4 The rinse aid empty
notification
When rinse aid chamber is empty, the
rinse aid indicator is turned on notifying to
refill rinse aid. If you are using multi-tabs
containing rinse aid and you are satisfied
with the drying result, you can deactivate
the notification for refilling rinse aid.
However, we recommend that you always
use rinse aid for best drying performance.
If you use standard detergent or multi-
tablets without rinse aid, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
start to flash and the display is
blank.
.
and
go off.
continues to flash.
= level 4.
0A to 6A.
released.
again and again to change
and
,
2. Press
• The indicators
off.
• The indicator
to flash.
• The display shows the current
setting:
dispenser is activated (factory
setting).
3. Press
= the rinse aid dispenser is
deactivated.
4. Press the on/off button to confirm the
setting.
6.5 MyFavourite
With this option you can set and save the
programme that you use more frequently.
You can only save 1 programme. A new
setting cancels the previous one.
How to save the MyFavourite
programme
1. Set the programme that you want to
save
You can also set applicable options
together with the programme.
2. Press and hold MyFavourite until the
indicators of the programme and the
options flash for a few seconds.
How to set the MyFavourite
programme
Press MyFavourite.
• The indicators that are related to
the MyFavourite programme and
options come on.
until
• The display shows the duration of
the programme.
and
.
and
= the rinse aid
to change the setting.
go
continues