Table of Contents
Advertisement
To adjust the stand height
To change the stand height, change the position of the stand plate as illustrated below after
detaching the stand from the monitor.
• For detaching the stand, see "To detach the stand" on page 4.
<Higher position>
Screw holes for higher
position
Stand plate
<Lower position>
Screw holes for lower
position
Stand plate
To prevent an accidental fall
Fix the monitor to a wall by using strings.
Fixing the monitor
Attach the hook (not provided) to the VESA mounting holes on the rear panel using M4 x 10 mm
screws (not provided). Bind the hooks on the rear panel of the monitor to a wall or a pillar using
durable string.
The illustration of the monitor is of
TM-19L2D.
Hook and screws (M4 x 10 mm)
(not provided)
Hook (not provided)
ENGLISH
5
Advertisement
Table of Contents
