JVC VN-H157WPU Instructions Manual page 16

No. Item
Event List
④
Playback menu
Displays a list of search results for recorded videos filtered by time and event
trigger. Select the item from the displayed list that you want to play and begin
playback.
From/To
Displayed videos will be limited to those recorded between the 2 times that you
specify.
Event Type
Displayed videos will be limited to those of the event trigger* type that you
specify.
Event Trigger： Pin Input1 Make, Pin Input2 Make, Motion Detection, Position,
*
Day/Night, Audio Detection1, Audio Detection2, Tampering Detection, Time,
Network outage
Memo:
Depending on the camera model, you may be unable to select the event
trigger.
A starting event for continuous recording cannot be specified.
After opening the Playback Screen with the Built-in Viewer, results may not be
displayed if a search is immediately performed.
After opening the SD Card Playback Screen, wait at least one second before
performing a search.
[Search] button
A list of search results based on the search parameter that you add a check to is
displayed. If no search parameter is checked, all events are displayed.
Event List
Displays a list of recording start dates/times with the event type in chronological
order from the newest event.
[Prev] / [Next] buttons
A maximum of 100 results can be displayed on 1 page. Press [Prev] to move to
pages with newer recording start dates/times, and press [Next] to move to pages
with older recording start dates/times.
[Playback] button
Select an event from the list and press the [Playback] button to start playback.
Note：
When an event is finished playing, the next event is automatically played back.
(The list marker in the list does not move to the next event displayed in the
list.)
If you record over the recording start date/time of a video, the event
disappears from the list. You can still play portions of the video that have not
been overwritten by using the [Specified Time Playback] menu.
Description
16