JVC VN-H157WPU Instructions Manual page 13

No. Item
Interval
⑤
(VN-H57U/H2
57U/H257VP
U/H157WPU
only)
Trigger2
(VN-H57U/H2
57U/H257VP
U/H157WPU
only)
Position
Number
This is available when both [Trigger1] and [Trigger2] are set.
Specify the maximum interval between each trigger for [Trigger1] and [Trigger2].
An alarm recording will be performed if [Trigger2] occurs within the maximum
time interval after [Trigger1] occurs.
[Set values：1 – 3600 ] sec
Memo:
If you set an invalid value, the "Invalid value" dialog is displayed.
If you leave a value blank, the "Blank value" dialog is displayed.
Select the 2nd trigger to start alarm recording.
[Set values：Disable, Pin Input1 Make, Pin Input1 Break, Pin Input2 Make,
Pin Input2 Break]
Memo:
If you set the same items for [Trigger1] and [Trigger2], the "Trigger1 and
Trigger2 are the same." dialog is displayed and alarm recording is not started.
If you set "Day/Night" to [Trigger1], the options "Black and White" and "Color"
become selectable.
Enabled when "Position" is set for the trigger for [Trigger1].
Perform registration of position numbers via the Built-in Viewer's "PTZ setting".
( "Instructions(Setting)" ─ "Operations" ─ "Built-in Viewer Operations" ─ "PTZ
Settings")
This position condition will also work if you manually move the PTZ, or if the PTZ
is automatically moved via auto patrolling.
[Set values: 0 – 19]
Description
* The [Set values] in bold letters are factory defaults
13