JVC VN-H157WPU Instructions Manual page 11

No. Item
Record Status
③
Recording Mode
④
Constant
Starts and stops recording to an SD card.
[Set values : ON, OFF]
[Status : No Recording, Recording]
This is only enabled when the SD card status is "Use" and the format status is
"Format complete".
When recording, the status changes to [Recording]. When recording is stopped,
the status changes to [Stopped]. When only alarm recording is selected, the
status becomes [Recording] when the alarm is engaged, and [Stopped] when
nothing is detected.
After selecting one of the "Setting Pattern" items in "Encode Setting", select [ON]
and press [OK] to enable recording to the SD card.
If you push [OK] when the encoding setting has not been set, the "Select an
encoding setting." dialog is displayed and recording does not start.
Select "OFF" and click the [OK] button to stop recording.
For specifying the mode for recording to the SD card.
"Constant", "Alarm", and "Network outage" can be selected. Multiple options or all
of the options can be selected.
Select this by adding a check to the checkbox for the desired mode.
To change the Recording Mode, select "OFF" for ③ Record Status, push the
[OK] button to stop recording, and then configure settings.
If no check is added to either box and you set recording to "ON" and press the
[OK] button, the "Set the recording mode." dialog is displayed and recording does
not start.
Note：
"Constant", "Alarm", and "Network outage" for the SD card recording are not
theft or fire prevention functions.
It is not possible for "Network outage" to handle all network interruptions.
Our company will not be liable for damages or unexpected accidents.
Memo：
When the record status is "ON", the setting for Recording Mode cannot be
changed.
If all the free space on the SD card is used, recording will continue by deleting
from the oldest recording data to allocate recording space.
Constantly records to the SD card.
Description
* The [Set values] in bold letters are factory defaults.
11