Table of Contents
Advertisement
Problem
Static is heard, sound
cuts in and out.
Interference from other
electrical units.
I cannot make a call.
I cannot redial by
pressing {REDIAL}.
I cannot have a
conversation using the
headset.
I cannot make long
distance calls.
I cannot page the
handset.
Caller ID
Problem
I cannot dial the phone
number edited in the
caller list.
The 2nd caller's
information is not
displayed during an
outside call.
For assistance, please visit http://www.panasonic.com/help
Cause/solution
L Move the handset and the base unit away from other
electrical appliances.
L Move the handset closer to the base unit.
L Press {CH} to select a clearer channel in the talk mode.
L If your unit is connected to a telephone line with DSL
service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your DSL provider for details.
L The dialing mode may be set incorrectly. Change the
setting (page 13).
L The base unit is in use. Try again later.
L If the last number dialed was more than 24 digits long,
the number will not be redialed correctly. Dial the
number manually.
L Make sure that an optional headset is connected
properly (page 25).
L Make sure that you have long distance service.
L The called handset is too far from the base unit.
L The called handset is in use. Try again later.
Cause/solution
L The phone number you dialed might have an incorrectly
edited pattern (for example, the long distance "1" or the
area code is missing). Edit the phone number with
another pattern (page 19).
L In order to use Caller ID, Call Waiting, or Call Waiting
Caller ID (CWID), you must first contact your telephone
service provider and subscribe to the desired service.
After subscribing, you may need to contact your
telephone service provider again to activate this
specific service, even if you already subscribed to both
Caller ID and Call Waiting with Caller ID services
(CWID).
Useful Information
27
Advertisement
Table of Contents
