Installing The Built-In Viewer - JVC VN-E4 Startup Manual

(2) Installing the built-in viewer

1.
Enter the URL of the built-in viewer in Internet Explorer's address field. For example, enter as follows if the IP
address of VN-E4 is 192.168.0.2.
https://192.168.0.2/e4viewer/e4monitor.html
A
Enter the URL of built-in viewer of the unit. (In factory setting,
https://192.168.0.2/e4viewer/e4monitor.html is the URL when there is no
DHCP server.)
MEMO
● Direct specification of the IP address may not be possible when a proxy server is used for
Internet access. In this case, disable the proxy setting.
● When a security warning screen appears, click the AOKB button to proceed.
2.
Enter the user name and password.
3.
The viewer will be installed and launched.
A
Enter user name of administrator. Factory setting is AadminB.
B
Enter password of administrator. Factory setting is Avn-e4B.
C
Click AOKB.
B
Click AGoB.
19