Preparation 1. System Setup Examples; Remote Monitoring Using The Built-In Viewer - JVC VN-E4U - 4 Channel Network Encoder Instructions Manual

Preparation
1. System Setup Examples

1-1 Remote monitoring using the built-in viewer

The built-in viewer of VN-E4 can be used to enable remote monitoring via the PC.
Camera 1
Camera 2
Camera 3
Camera 4
Amplifier
Microphone
Speaker
In addition to monitoring images of the 4 channels, bi-directional audio conversation is also possible.
When there is alarm input and detected motion, these will be displayed on the viewer. A warning light may be connected to the
alarm output terminal, which may be illuminated upon alarm input.
Images that are currently displayed may be captured in the PC's hard disk.
10
VIDEO IN 1
VIDEO IN 2
VIDEO IN 3
Sensor
Lamp
VIDEO IN 4
COM OUT
AUDIO IN AUDIO VIDEO INPUT
IN 1CH 2CH
OUT
3CH 4CH
AUDIO OUT
Amplifier
ALARM
INPUT/G
ALARM
CONTROL
COM1 SERVICE
COM OUT 1 2 3 4 G INPUT
OUTPUT
PUSH
RESET
COM2 DC 5V
10BASE-T/100BASE-TX
Network
Network
Amplifier
Microphone
PC