The Phonebook; Replying To A Message - Panasonic KX-TG1850ALT Operating Instructions Manual

TG1850AL(e).book Page 38 Monday, December 6, 2004 9:10 PM
SMS (Short Message Service)
Reading a received message
1
Press $ (middle soft key).
2
Select X, then press ,.
3
To access the public mailbox
Select "Public", then press ,.
To access a private mailbox
Select the desired mailbox, press ,,
then enter its password.
L If a mailbox contains new (unread)
SMS messages, @ is displayed next to
the total number of messages for that
mailbox.
4
Select "Receive List", then press
,.
5
Press {e} or {v} repeatedly to select a
message.
L Messages which have already been
read are indicated by a Q, even if they
were read using another handset.
L To erase a message, press w,
select "Yes", then press ,.
6
Press , to read the message
content.
Note:
L To call the message sender, press {C}
or {s}.
L If "SMS Full" is displayed, new SMS
messages cannot be received. Erase
unnecessary messages (page 37, 38).
L If you receive a message from a party
saved in the phonebook, the stored name
is displayed.
L Some SMS service providers attach a 1-
digit number to the message sender's
phone number, and sender names stored
in the phonebook may not be displayed as
a result.

Replying to a message

1
While reading a received message,
press $ (middle soft key).
38
2
Select "Reply", then press ,.
3
Enter a message (page 41), then press
,.
4
Edit the destination phone number
and/or press ,.
5
Continue from step 7, "Writing and
sending a new message", page 36.
Editing/forwarding a message
1
While reading a received message,
press $ (middle soft key).
2
Select "Edit Message", then press
,.
3
Continue from step 5, "Writing and
sending a new message", page 36.
Erasing received messages
1
While reading a received message,
press $ (middle soft key).
2
Select "Erase", then press ,.
L To erase all messages in the selected
mailbox, select "Erase All", then
press ,.
3
Select "Yes", then press ,.
4
Press {ih}.
Storing the sender's number in

the phonebook

1
While reading a received message,
press $ (middle soft key).
2
Select "Add Phonebook", then press
,.
3
Continue from step 3, "Adding entries to
the phonebook", page 18.
Editing the sender's number
before calling back
1
While reading a received message,
press $ (middle soft key).