Receiving A Message - Panasonic KX-TG1850ALT Operating Instructions Manual

TG1850AL(e).book Page 37 Monday, December 6, 2004 9:10 PM
L "Invalid Number" is displayed if you
try to send a message to a phone number
saved in the phonebook, caller list, or
redial list that is over 20 digits long.
L When sending a message, "Sending
Message" is displayed momentarily, then
"Transferring Message" is
displayed.
L If your phone is connected to a PBX, store
the PBX line access number (page 40).
Sending a saved message
1
Press $ (middle soft key).
2
Select X, then press ,.
3
To access the public mailbox
Select "Public", then press ,.
To access a private mailbox
Select the desired mailbox, press ,,
then enter its password.
4
Select "Send List", then press ,.
5
To read a saved message, press {e} or
{v} repeatedly to select the message,
then press ,.
L Messages are displayed in
chronological order and by destination
phone number.
6
To send the message, press $,
select "Send", then press ,.
7
Press and hold {C/T} to erase all
numbers, then continue from step 6,
"Writing and sending a new message",
page 36.
Editing and sending a saved
message
1
Press $ (middle soft key).
2
Select X, then press ,.
3
To access the public mailbox
Select "Public", then press ,.
To access a private mailbox
Select the desired mailbox, press ,,
then enter its password.
SMS (Short Message Service)
4
Select "Send List", then press ,.
5
Press {e} or {v} repeatedly to select
the message, then press ,.
6
Press $, select "Edit Message",
press ,, then continue from step 5,
"Writing and sending a new message",
page 36.
Erasing saved messages
1
Press $ (middle soft key).
2
Select X, then press ,.
3
To access the public mailbox
Select "Public", then press ,.
To access a private mailbox
Select the desired mailbox, press ,,
then enter its password.
4
Select "Send List", then press ,.
5
Press {e} or {v} repeatedly to select
the message, then press ,.
6
Press $, select "Erase", then press
,.
L To erase all messages in the selected
mailbox, select "Erase All", then
press ,.
7
Select "Yes", then press ,.
8
Press {ih}.

Receiving a message

When an SMS message is received:
– a tone is heard (if the ringer is turned off,
this tone is not heard)
– "Receiving SMS Message" is
displayed
– h is displayed
– the total number of new (unread) SMS
messages is displayed next to h if the
screen saver (page 13) is turned off
37