Brake Lever Adjuster; Brake Fluid - KYMCO XCITING 500Ri ABS Owner's Manual

Hide thumbs Also See for XCITING 500Ri ABS:
Table of Contents

Advertisement

BRAKE LEVER ADJUSTER

There is an adjuster on both the brake levers. Each
adjuster has 4 positions so that the released lever
(3)
position can be adjusted to suit the operator's hands.
Push the lever (1) forward and turn the adjuster (2) to
align the number with the arrow mark (3) on the lever
holder. The distance from the grip to the released lever is
(2)
minimum at number 4 and maximum at number 1.

BRAKE FLUID

(1)
Brake fluid level:
With the scooter in an upright position, check the front
and rear fluid level. It should be above the lower level
mark. If the level is at or below the lower level mark " ",
L
L
check the brake pads for wear
(see page 88)
.
Worn pads should be replaced. If the pads are not worn,
have your brake system inspected for leaks.
The recommended brake fluid is
DOT 4
brake fluid from a
sealed container, or an equivalent.
Other checks:
Make sure there are no fluid leaks. Check for
deterioration or cracks in the hoses and fittings.
87

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xciting 300riXciting 300i

Table of Contents