NEC D3 Quick Start Manual page 30

15. After you set the host connection port
parameters, a confirmation window will
appear. Review the port settings and
click Set to continue if they are correct.
Otherwise, click Back to return to the
previous step and modify the port
settings as needed.
16. At the Enter License Keys window, type
in the Base Product License key from
the NEC Storage software license code
provided on the Program Product
License Sheet that was shipped with the
array. Click Enter after the code has
been typed in the License Key field.
When the code has been typed, click
Next to continue.
Note: at this time do not enter in other
license codes. More specifically, if you
enter the Access Control license key,
you will need to set up Access Control
or servers will not be able access the
Logical Disks. Setting up Access
Control is not included in the Quick Start
Guide.
NEC D3/D4 Quick Start Guide 28