Panasonic SC-HC38 Operating Instructions Manual page 17

3
Attach the wall mount bracket to the wall with 2
screws (not supplied). (Both sides)
≥ Use a level to ensure both wall mount brackets are
level.
At least 30 mm
‰4 mm
4
Fix the safety holder onto the unit with the screw
(supplied).
{. Screw tightening torque: 50 N0cm to 70 N0cm.
5
Attach the fall prevention cord (not supplied) to this
unit.
‰7.5 mm to
‰9.4 mm
Wall mount bracket
Screw
(supplied)
Cord (not supplied)
6
Hook the unit securely onto the wall mount
brackets with both hands.
≥ Connect the antenna and the AC mains lead to the unit
before hanging the unit onto the wall. (l 5)
≥ After hanging the unit, release your hands carefully to
confirm the unit sits securely on the wall.
Wall
7
Drive the safety holder fixing screw (not supplied)
to secure the safety holder onto the wall.
≥ Refer to step 3 for requirements before screwing.
Safety holder fixing screw
(not supplied)
8
Attach the fall prevention cord (not supplied) to the
wall.
≥ Make sure that the slack of the cord is minimal.
Screw eye
(not supplied)
Cord (not supplied)
Safety holder
Fixed to the wall
Wall
17
RQT9746