Using The Menu Screen - Panasonic PV-GS400 Operating Instructions Manual

ª Adjusting Brightness and Color Level
When [LCD/EVF SET] on the [LCD/EVF]
Sub-Menu is set to [YES], the following items are
displayed.
LCD/EVF SETUP
1LCD BRIGHTNESS
[-]||||----[+]
LCD COLOR LEVEL
[-]||||----[+]
EVF BRIGHTNESS
[-]||||----[+]
;/∫:SELECT &/%:SETUP
LCD Brightness [LCD BRIGHTNESS]
Adjusts the brightness of the image on the LCD
screen.
LCD Color Level [LCD COLOR LEVEL]
Adjusts the color saturation of the image on the
LCD screen.
Brightness of the Viewfinder
[EVF BRIGHTNESS]
Adjusts the brightness of the image in the
Viewfinder.
To Adjust
Press the [;/∫] Button and select the item to be
adjusted, and then press the [6/5] Button to
raise or lower the number of vertical bars in the
Bar Indication.
≥More vertical bars indicates stronger brightness
or color saturation.
To Increase the Brightness of the Entire LCD
Monitor
Press the [POWER LCD]
When you press the [POWER LCD] Button, the
LCD monitor becomes about twice as bright as
usual.
≥The POWER LCD Lamp
≥When turning the power on while using AC
Adaptor, [POWER LCD] function is
automatically effective.
≥When you rotate the LCD Monitor 180o and then
close it, it resumes normal brightness.
To Resume Normal Brightness
Press the [POWER LCD] Button again.
To Change the Picture Quality of the LCD
Monitor
Set the [LCD AI] on the [LCD/EVF] Sub-Menu to
[ON] or [OFF].
[ON]: The screen image becomes clear and
vivid. (The effect varies according to the
recording scene.)
Before Use
!/MENU:EXIT
(30) Button.
POWER
LCD
(30)
(30)
lights up.
≥When Power LCD Lamp lights up, [LCD AI] is
automatically set to [ON]. You cannot change
this setting.
≥These adjustments do not affect the recorded
images.
≥For other notes concerning this item, see

Using the Menu Screen

To facilitate the selection of a desired function or
setup, this Camcorder displays various function
setups on Menus.
≥When operating the menu with the Viewfinder,
set [LCD/EVF] >> [EVF ON/AUTO] >> [ON] or
rotate the LCD monitor by 180o.
1
Press the [MENU] Button
STILL
ENTER
(16)
FADE
MENU
≥The Menu corresponding to the Mode
selected by using the Mode Dial
displayed.
(44)
2
Press the [;/∫] Button to select a desired
Sub-Menu.
≥Press the [;/∫] Button to display the
highlighted item.
3
Press the [5] Button to display the
selected Sub-Menu.
4
Press the [;/∫] Button to select the item.
5
Press the [5] Button to display the
selected item.
6
Press the [;/∫] Button to select the desired
mode and press [ENTER] Button to
determine the setting.
≥While a Menu is displayed, you cannot record or
play back. Menus can be displayed during
playback but not during recording. The above
operations can be done using the [MENU]
Button, [π, ∑, ∏, ∫] Buttons and [ENTER]
Button on the Remote Controller. (
To Return to the Previous Screen
Press the [6] Button.
To Exit the Menu Screen
Press the [MENU] Button again.
.
-85-
(16) .
(44) is
)
-14-
21