Setting Alarm - Panasonic KX-TCD705BX Operating Instructions Manual

KX-TCD705BX 12/7/01
Handset Programming
Setting Time Alarm
The handset(s) will sound an alarm at a preset time for 30 seconds once or everyday.
To set the time, see below:-
In the 'Setting Handset' mode
Y or V
S/U
Select
'Time Alarm'
• To set the alarm ON/OFF, etc. see page 37.
To Stop the Alarm
When the alarm sounds, press any dialling button K to I, $, L or O to
stop alarm.
The alarm time turns off and the display returns to the standby mode. If 'Once' is
selected, the setting is automatically turned off.
If the unit is in the talk, speakerphone or intercom mode during the alarm time, the
alarm will not sound. After finishing, the alarm will start ringing.
Setting Direct Call Number
You can store one number in the Direct Call memory. This feature allows you to make a
call easily by pressing O or %.Incoming calls are accepted.
In the 'Setting Handset' mode
Y or V
S/U
Select 'Call
Option'
• To set the Direct Number ON/OFF, see page 38.
Dialling the Stored Number
1. Make sure that " " is displayed in the standby mode.
2. Z O or %.
The number stored in the direct call memory is dialled automatically.
When the handset is in the 'Direct Call' mode, it is not possible to make any
calls until direct call is cancelled. This also includes emergency calls.
2:28 pm Page 40
Y or V
S/U <Enter Time>
NOTE: If time has
Select 'Set
previously been
Alarm Time'
set, it will be
displayed.
S/U <Enter Phone No>
Y
Select NOTE: If number has
'Direct previously been entered,
the number is displayed.
Call No.'
To edit the number, see
page 20.
Y or V
Y
40
Y or V
S/U
Select
'Save'
Y or V
S/U
Select
'Save'