Panasonic KX-TCD705BX Operating Instructions Manual page 50

KX-TCD705BX 12/7/01
Problem
You cannot redial
You cannot program the handset
settings such as display language
You cannot store a name or phone
number in the Phonebook.
While programming or searching,
the unit starts to ring and stops
the program/search.
The display goes to the standby
mode while viewing the Caller List
or phonebook.
Ï does not function.
The paged handset does not
answer.
While using the intercom, 2 tones
sound.
The unit misdials when connected
to a PBX.
2:28 pm Page 50
• Access numbers entered after pressing $ will no
be included whn redialling.
• If the last number dialled was more than 24 digits
long, the number will not be redialled correctly.
• Programming is not possible while the unit is in the
• talk, speakerphone or intercom mode or when
viewing the Caller List/Phonebook list.
• Do not pause for over 60 seconds while
programming.
• Make sure that the handset is in the standby mode.
• You cannot store a name and phone number while
• the unit is in the talk, speakerphone or intercom
mode.
• Do not pause for over 60 seconds while storing.
• To answer the call, Z O or %.
• Start again from the beginning after hanging up.
• Do not pause for over 60 seconds while searching.
• The handset is too far from the base unit.
• The handset is engaged in an outside call or is
viewing the Caller List or Phonebook.
• The handset is not in the same radio area.
• The handset is engaged in an outside call.
• The handset has been cancelled or has not been
registered. Register the handset in the base unit
(pages 39, 41).
• A call is being received. To answer press P then
O.
• Check the pause function (pages 45).
Cause and Remedy
50