Installing The Batteries In The Handset; Battery Charge; Battery Information; On The Base Unit - Panasonic KX-TCD705BX Operating Instructions Manual

KX-TCD705BX 12/7/01

Installing the Batteries in the Handset

• If the
rechargeable
batteries are not
inserted correctly,
the handset will
not work.

Battery Charge

At the time of shipment, the batteries are not
charged. To charge, place the handset on the
base unit. Please charge the batteries for
approximately 10 hours before initial use.
During charging, the battery icon is as shown.
Battery Strength
You can check the present battery
strength on the display.
Recharge
When "Û" flashes or the unit beeps every 15 seconds, recharge the batteries.

Battery Information

After your batteries are fully charged:
Operation
While in use (Talk)
While not in use (Standby)
• Battery life may vary depending on usage conditions, such as:
– when viewing the Caller ID Caller List,
– when talking in the speakerphone mode, or using headset, and
– ambient temperature.
• Clean the handset charge contacts with a soft, dry cloth once a month. Clean
more often if the unit is subject to grease, dust or high humidity. Otherwise the
batteries may not charge properly.
• If the batteries are fully charged, you do not have to place the handset on the base unit
until "Û" flashes. This will maximise the battery life.
• The batteries cannot be overcharged.
2:28 pm Page 7
Ni-MH battery life (Included)
Up to about 20 hours
Up to about 160 hours
Full
Flashing
Battery strength Fully charged Medium
Ò Ú
Battery icon
Ni-Cd battery life (optional)
Up to about 12 hours (based on 800m/A per hour)
Up to about 100 hours
7
Low
Low No power
Û Û
(Flashing)