Multi-Unit User Operations - Panasonic KX-TCD505E Operating Instructions Manual

Operating Additional Handsets
Additional KX-TCA151E handsets are available for purchase separately. Up to 6
handsets can be registered to a single base unit. Using additional handsets allows you
to have an intercom call while simultaneously conducting a call to an outside line.
Operating Additional Base Units
You can register and operate your handset with up to 4 base units. Each base unit forms
1 radio cell. If the individual bases are linked to the same telephone line then you can
extend the operating range of the system by positioning the bases so that the two radio
cells overlap. If the handset is set to auto base selection, then in standby mode the
handset will automatically swap to the second base if the range on the first base is
exceeded. It is not possible to transfer calls between bases (only between handsets
linked to the same base unit).
Radio Cell
Example:
Additional handsets
(KX-TCA151E) registered
with 2 base units.
NOTE: Calls are disconnected when the handset moves from one radio cell to
another.
KX-TCA151E Handset: You can see the illustrations for answering system feature on
additional KX-TCA151E handset body, but KX-TCD505E does not have an answering
system feature. Therefore, the answering system does not work even if KX-TCA151E
handset has been registered to KX-TCD505E.
Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333

Multi-Unit User Operations

2
1
3
4
5
61