Panasonic KX-TCD505E Operating Instructions Manual page 41

Setting the PBX Line Access Number
This feature is only for the phones connected to a PBX. This allows you to delete
automatically the PBX line access number (max. 4 digits) when you enter the destination
phone number of an SMS outgoing message from Phonebook, Redial or Caller ID lists.
To exit the operation, press
1
Press JOYSTICK
(or move).
4
Enter 4-digit Base
Unit PIN.
(Factory Preset
0000)
7
Enter Line Access
Number.
(max. 4 digits)
Turning the SMS Feature On/Off
To exit the operation, press
1
Press JOYSTICK
(or move).
4
Enter 4-digit Base Unit
PIN.
(Factory Preset 0000)
When the SMS feature is turned off;
•
If you send a message, a tone sounds and the message will return to the SMS incoming
list with " " attached.
FD
•
If you receive from SMS centre call, the message will not be received but SMS centre
phone number will remain in the Caller ID list.
• If you turn the SMS feature on, the unit will begin ringing (one ring) after other
connected telephones.
• The factory preset is "On".
Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333
SMS Feature (Text Message)
at any time.
2
Select "
SMS".
5
Select "PBX Prefix".
8
Press JOYSTICK.
at any time.
2
Select "
5
Select "SMS On/Off".
3
Select "Parameters".
6
Select "On".
9
Select "Save", then
"Saved" is displayed.
3
SMS".
6
Select
"Parameters".
Select "On" or
"Off".
41