Panasonic DVD-S52 Operating Instructions Manual page 21

∫ "Audio" tab
§ Off:
PCM Digital Output
Check the digital input
Up to 48 kHz: When connected to equipment compatible
limitations of the
equipment you
Up to 96 kHz: When connected to equipment compatible
connect using
COAXIAL or
Up to 192 kHz: When connected to equipment compatible
OPTICAL terminal
and select the
≥Signals from copy-protected discs are converted to 48 or
maximum sampling
44.1 kHz.
frequency of PCM
≥Some equipment cannot handle sampling frequencies of
digital output.
88.2 kHz, even if they can handle 96 kHz. Read your
equipment's operating instructions for details.
§ Bitstream
Dolby Digital
PCM
With COAXIAL,
OPTICAL or HDMI AV
OUT connections
(➜ page 7, 8)
DTS Digital Bitstream
§
Surround PCM
With COAXIAL,
OPTICAL or HDMI AV
OUT connections
(➜ page 7, 8)
Dynamic Range Off
Compression On: Adjusts for clarity even when the volume is low through
compressing the range of the lowest sound level and the
highest sound level. Convenient for late night viewing.
(Only works with Dolby Digital)
§
When audio is output from HDMI AV OUT terminal, and the connected equipment
does not support the item selected, the actual output will depend on the performance
of this connected epuipment.
∫ "HDMI" tab
RGB Range Standard
Enhanced: When the black and white images are not distinct.
Set "HDMI Color Space"
to "RGB" (➜ page 18,
Picture Menu) .
When not connected with COAXIAL or
OPTICAL terminal
with 44.1 or 48 kHz
with 88.2 or 96 kHz
with 176.4 or 192 kHz
Select "Bitstream" when the
equipment can decode the
bitstream (digital form of multi-
channel data). Otherwise,
select "PCM".
(If the bitstream is output to
the equipment without a
decoder, high levels of noise
can be output and may
damage your speakers and
hearing.)
Video Output On: Select this when connected through the HDMI terminal.
Video is output from the HDMI terminal. Video is also
(This setting is
output from the COMPONENT VIDEO OUT terminal,
irrelevant when
but only in 480p (progressive).
connected through
Off: Select this when connected through the COMPONENT
the VIDEO or S
VIDEO OUT terminal. Video is not output from the
VIDEO OUT
HDMI terminal, but from the COMPONENT VIDEO
terminal.)
OUT terminal according to the setting of the"Video
Output Mode" (➜ page 18, Picture Menu).
Audio Output On: When audio output is from HDMI AV OUT terminal.
(Depending on the capabilities of the connected equipment,
audio output may differ from the audio settings.)
Off: When audio output is not from HDMI AV OUT terminal.
(The audio is output using the settings of this unit.)
Speaker Settings Speaker Type
Choose the settings to
Multi-channel: when 3 or more speakers are connected.
suit your audio system
2-channel:
and the listening
Multi-channel Setting (If you select "Multi-channel")
environment
Speaker presence and size
(➜ page 22, Changing
Delay time
the speaker setting to
suit your speakers).
∫ "Display" tab
Menu Language
On-Screen Messages
Background during Play
Select background during JPEG,
MPEG4 and DivX video playback.
∫ "Others" tab
FL Dimmer Bright
Changes the brightness Auto: The display is dimmed, but brightens only when you
of the unit's display. perform some operations.
Auto Power Off On: The unit switches to standby mode after about 30
minutes in the stop mode.
Off
DivX Registration You need this registration code to purchase and play DivX
Video-on-Demand (VOD) content. (➜ page 16, About DivX
Displays the unit's
VOD content)
registration code.
QUICK SETUP Yes
Re-initialize Setting Yes: The password screen is shown if "Ratings" (➜ page 20)
This returns all values is set. Please enter the same password and press
in the Setup menus to [ENTER].
the default settings. No
when 2 speakers are connected.
English Français Español
On Off
Black Gray
Dim
No
21