Panasonic TX-P50UT50Y Operating Instructions Manual page 6

Securing the TV
Use the assembly screws
Tighten the four assembly screws loosely at first, then
tighten them firmly to fix securely.
Carry out the work on a horizontal and level surface.
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws
2 Pull out the pedestal from the TV.
3 Remove the assembly screw
4 Remove the assembly screws
5 Remove the assembly screws
Preventing the TV from falling over
Using the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the
installation surface.
The place where the pedestal is to be fixed should be thick enough and made of hard material.
6
to fasten securely.
from the TV.
from the cover.
from the bracket.
from the back of the base and pull out the neck.
Arrow mark
Screw (not supplied)
Diametre: 3 mm
Length: 25 - 30 mm
Screw hole
A
Hole for pedestal
installation