Panasonic TX-P50UT50Y Operating Instructions Manual page 5

Caution
Do not use any pedestal other than the one provided with this TV.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal while it is physically damaged, personal injury may result. Contact your local Panasonic
dealer immediately.
During set-up, make sure that all screws are securely tightened.
If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Ensure that the TV does not fall over.
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injury
may result.
Two or more people are required to install and remove the TV.
If two or more people are not present, the TV may be dropped, and personal injury may result.
When removing the pedestal from the TV, do not remove the pedestal by the methods other than the specified
procedure. (p. 6)
Otherwise the TV and / or pedestal may fall over and become damaged, and personal injury may result.
Assembly screw (5)
(black)
M4 × 10
Assembly screw (7)
(silver)
M5 × 16
Assembling the pedestal
1 Insert the tabs of the neck
firmly
D
3 Attach the bracket
and fix with assembly screws
C
G
Set the sheet on the neck
(TX-P50UT50Y only)
Bracket
TBL5ZA3238
Neck
TXFBL5Z0072
into the base
Tabs (bottom)
F
to the tabs of the neck
B
Tabs (top)
D
.
Cover
TXFBL5Z0073
Base
TBL5ZX0293 (TX-P42UT50Y)
TBL5ZX0295 (TX-P50UT50Y)
2 Turn the base over and fix the neck
with assembly screws
Do not hold the neck when turning over the base.
B
F
Back of the base
4 Attach the cover and fix securely with assembly
screw
A
E
Sheet
TMK5ZX032
(TX-P50UT50Y only)
securely
Screw hole
5