Table of Contents
Advertisement
9 Auxiliary Settings
(4) To close the dialog box displayed in the process of a system confi guration check, current
system confi guration registration, or initialization, click on "×" on the upper right corner.
As the process continues after the dialog box is closed, if you attempt to perform other
operation, the same message will be displayed again. The message is also displayed again
if you click on
(5) Power off
If you click on "Power off" , the message shown below will be displayed.
If you click on "YES" , the system is preparing for safely shutting down the Web Interface main
unit. Never turn off the Web Interface main unit while the following message is displayed:
Make sure that the following message is displayed then set the Power switch of the Web
Interface to OFF .
After this message is displayed, to log in again, the Power switch of the Web Interface must
be set to ON again.
(6) Check button
When you click on the "Check" button while this button is valid, the current process of the
Web Interface will be displayed.
"Check" in the screen example.
44
4 4
Main
Sub
Advertisement
Table of Contents
