Table of Contents
Advertisement
6 Status/Control
6.2 Displaying detailed information by tenant
When "1. Status/Control: 2. Each tenant details" is selected from the menu, the screen shown
below is displayed. (The details of the displayed screen vary, depending on the type of
account used for login.)
When any of the indoor units is clicked on, the remote controller screen will be displayed.
Operations on this screen are the same as those on the "Each tenant" screen. See the
relevant heading.
Even in a case of group control, the main units, as well as sub unit, are displayed.
The indications for sub units are grayed, and the remote controller screen will not open if you
click on a grayed indication. To open the remote control screen, select the main unit.
For sub units, the cells for the fl ap setting and remote controller prohibition setting are blank.
19
1 2
Main
Sub
Advertisement
Table of Contents
