Panasonic CZ-CWEBC2 Operation Manual page 30

Centralized control system
Table of Contents

Advertisement

8 Initial Settings
Enter the IP addresses for the primary and secondary DNS servers, as required.
Enter the IP addresses for the primary and secondary WINS servers, as required.
Enter a device name (ID name) of the Web Interface.
(This device name is used for identifying the Web Interface when a DNS server is used.)
Up to 15 characters, "-" (hyphen), and "_" (underscore) can be used.
Only an alphabetic (A–Z, a–z) can be used for the fi rst character.
Neither a "-" (hyphen) nor an "_" (underscore) can be used for the last character.
[E-mail setting] The settings for automatic delivery of e-mail notifying of an occurrence of or
restoration from an error of an air conditioner:
For sending test mail
Enter the IP address (or domain name) of the mail (SMTP) server that is separately
contracted.
One-byte alphanumerics, "@" (at sign), "・" (bullet), "_" (underscore), and ":" (colon) can
be used.
Enter a sender's account name (within 40 characters).
An "=" (equal sign) cannot be used.
Enter a recipient account name (mail address) (within 40 characters).
A maximum of 3 accounts can be set.
For disabling input/changed data and returning to the original settings
Clicking on this button will enable the input settings and send them to the Web Interface.
The input data will only be enabled after being sent.
When the following message is displayed, click on "YES":
If any of the settings
shown below is displayed. Wait for at least 5 minutes before logging in again.
Network settings have been changed. The unit will restart.
Please log in again after about 5 minutes.
* For details on the settings on this screen, consult the network administrator for the
environment where the Web Interface has been installed.
* The range of values that can be set for the IP addresses, subnet mask, default gateway, and
the DNS and WINS blocks is 0–255.
* For the IP addresses, neither "0.0.0.0" nor "255.255.255.255" can be set.
* If an invalid value is entered, the following error message will be displayed:
is changed, the Web Interface will be restarted after the message
29
3 3
Main
Sub

Advertisement

Table of Contents
loading

Table of Contents