Panasonic CZ-CWEBC2 Operation Manual page 39

9 Auxiliary Settings
4 2
Main Sub
The tenant holiday and timer special days settings must be performed for individual tenants.
If you attempt to move to Tenant 002 setting while you are setting Tenant 001,
for example, the error message "Send for each tenant. " will be displayed, as shown below.
If this message is displayed, click on the "Send" button to enable the setting, or click on
the "Cancel" button to disable the setting then perform the setting for another tenant.
Select a tenant to whom you wish to copy data of holiday/timer special days setting.
If you click on "Copy –> Send" , the following message will be displayed:
If you click on "OK" , the setting data for the next 2 years will be copied from the upper
(source) tenant to the lower (destination) tenant.
If the setting for the upper (source) tenant is not valid, the "Copy –> Send" button is not
available.
First click on the "Send" button to make the setting valid then click on the "Copy –> Send"
button.
38