Before Using For The First Time - Siemens TE 809 Series Instruction Manual

Hide thumbs Also See for TE 809 Series:
Table of Contents

Advertisement

Available languages

Available languages

Before using for the
fi rst time
General
Fill the water tank with pure, cold, uncar-
bonated water only and preferably use only
beans or coffee blends suitable for fully
automatic espresso and coffee machines.
Do not use coffee beans that have been
glazed, caramelised or treated with other
additives containing sugar, since they will
block the brewing unit.
The water hardness setting can be adjusted
on this appliance. The factory setting for the
water hardness is 4. Check the hardness
of the water you use with the enclosed test
strip. If a value other than water hardness
4 is displayed, change the setting on the
appliance accordingly after switching on
(see "Menu settings – Water hardness").
Setting up the appliance
● Place the fully automatic espresso
machine on a fl at, water-resistant surface
that can take its weight.
Important: Only use the appliance in
frost-free rooms. If the appliance has been
transported or stored at temperatures below
0 °C, wait at least 3 hours before operation.
● Pull out the mains plug from the cable
compartment 24 and plug it in. Adjust the
length of the cable by pushing it back in
and pulling it out. To do this, place the
appliance with its back fl ush with the edge
of the work surface and either pull the
cable downwards or push it upwards.
● Lift the lid of the water tank 12.
● Remove and rinse the water tank 11 and
fi ll it with fresh, cold water. Do not fi ll
above the "max" mark.
● Replace the water tank 11 and push it
fi rmly downwards into place.
● Close the water tank lid 12 again.
● Fill the bean container 15 with coffee
beans.
TE809_1DE.indb 31
● Press the power switch 1 O / I . The
start button 8 lights up and the different
languages appear in the display 5.
The following languages can be selected:
TE809 DE
Deutsch
Français
TE809 RW
English
Nederlands
Italiano
Español
Українська
Türkçe
Norsk
Português
Ελληνικa
<
● Use the buttons
and
language in which you want the display
texts to appear.
Sprache
Deutsch
English
Français
The selected language is highlighted.
● Press the start button 8. The language
you selected is saved.
● The brand logo lights up in the display 5.
The appliance now heats up and rinses.
Some water will run out of the coffee
outlet 9.
en
English
Italiano
Русский
Français
Svenska
Polski
Magyar
Dansk
Suomi
Čeština
>
4 to select the
▶ start
31
08.05.2013 12:10:11

Advertisement

Table of Contents
loading

Table of Contents