Table of Contents
Advertisement
J
Programming Summary for the Answering
System
You can program the following functions using the handset near the
base unit. See the page numbers below for details.
The unit must be in the standby mode before programming.
[
[
Lift the handset, and press R_EDIAL/PAUSE/FUNCTION_].
Press [_
or (_
to select
"Program",
and press
EDiT [_.
I,
Press _
or _
to select "TAD
program",
and press EDIT _.
elf the handset displays "Ho
link
to
base
Place
on
cradle
and try
again."
and an alarm tone sounds,
move closer to the base unit and try again.
Press _
or _
to select the desired function, and press EDIT _.
f'Day
and
time
To adjust the day and time (p. 24).
Remote
code ..... t
TO set the remote code (p. 59).
Number
of
ring
1
To select the numb,er of rings (p. 27).
Recording
time
TO select the caller s recording time (p. 26).
When finished setting, press EDIT _
(Save key).
eA beep sounds.
eTo return to the standby mode, press LOLOLOLOLOLOLOLOLOL_.
• To cancel during programming,
press <0_!.
Start again from the beginning.
elf you do not press any buttons for 60 seconds, the unit will return to the standby
mode.
Advertisement
Table of Contents
