Operation - Olivetti d-Color MF550 Theory Of Operation

21. Duplex section

21.3 Operation

21.3.1 Duplex unit transport control
• The paper transported to the switchback part stops at the stop position 1 and then the
switchback roller turns around to transport the sheet to the duplex unit.
• When a sheet of paper being less than 127 mm is passing by the ADU transport roller/2
in the duplex unit, if the preceding paper has not reached the timing roller, the sheet
stops at the stop position 2.
• The paper transported to the duplex part always stops at the stop position 3 and wait
until paper is re-supplied.
• When the paper is supplied, it is transported to the timing roller.
Switchback part
Switchback roller
Timing roller
Stop position 3
150
Theory of Operation Ver. 8.0 Jun. 2008
Stop position 1
Theory of Operation
ADU transport roller/1
ADU transport sensor/1 (PS47)
ADU transport roller/2
Stop position 2
Duplex part
ADU transport roller/3
ADU transport sensor/2 (PS48)
ADU transport roller/4
A00JT2C245AA
Y107522-3