Network Settings - Toshiba TD-X552M User Manual

TD-X552M/TD-X552X
DisplayPort Ver.:
Choose Display Port Version 1.1a or 1.2.
Cooling Fan
Select {On} to turn on the cooling fan all the time. Select {Auto} to turn
on/off the cooling fan according to the display's temperature.
• The default {Auto} option will start running the
cooling fan if the temperature of 60°C (140°F) is
reached.
• A temperature-warning message will be shown
on the screen if the temperature reaches 70°C
(158°F).
• After the temperature reaches 70°C (158°F), for
three successive mininutes and a temperature-
waning message shown on the screen for 10
seconds, the display power will be shut down
automatically while Power LED will be blinking red
& green.
Network control port
Choose the RS232 control from the OPS or embedded RS232 from the
display.
Factory settings
Reset all your customized settings to the factory defaults.
5.2.

Network Settings

1. Press [ ] HOME button, choose
[ ] button.
Picture View network settings
Sound Network configuration
Tiling Static IP configuration
General settings Digital Media Render...
Network settings Network name
View network settings
View connected network status.
Network Configuration
{Network configuration}: Choose how this display should assign
addresses to the network resources.
The user can choose {DHCP & Auto IP} (suggested) or {Static IP}.
Static IP Configuration
Define {IP address}, {Netmask}, {Gateway}, {DNS1}, and {DNS2} for
this display. If {Network settings}  {Static IP} is chosen.
Digital Media Renderer - DMR
Receive multimedia files from the connected device on your network.
Network name
In the multiple-display connection, you can rename each display for easy
identification.
Network Settings
and press
Use the on-screen keyboard or the remote control keypad to enter the
name.
26