Network Settings - Toshiba TD-Z472 User Manual

TD-Z472
Information OSD
When you press [ ] POWER button to turn on the display from
standby mode or change the input signal, the information OSD is
displayed on the upper left corner of the screen.
Choose {Off} to turn off this function.
DisplayPort Ver.:
Choose Display Port Version 1.1a or 1.2.
Network control port
Choose the RS232 control from the OPS or embedded RS232 From
the display.
Factory settings
Reset all your customized settings to the factory defaults.
5.2.

Network Settings

1. Press [ ] HOME button, choose
[ ] button.
Picture View network settings
Sound Network configuration
Tiling Static IP configuration
General settings Digital Media Render...
Network settings Network name
View network settings
View connected network status.
1HWZRUN &RQÀJXUDWLRQ
{1HWZRUN FRQÀJXUDWLRQ` &KRRVH KRZ WKLV GLVSOD\ VKRXOG DVVLJQ
addresses to the network resources.
The user can choose {DHCP & Auto IP} (suggested) or {Static IP}.
6WDWLF ,3 &RQÀJXUDWLRQ
'HÀQH ^IP address}, {Netmask}, {Gateway}, {DNS1}, and {DNS2} for
this display. If {Network settings} Æ {Static IP} is chosen.
Digital Media Renderer - DMR
5HFHLYH PXOWLPHGLD ÀOHV IURP WKH FRQQHFWHG GHYLFH RQ \RXU QHWZRUN
Network name
In the multiple-display connection, you can rename each display for easy
LGHQWLÀFDWLRQ
Use the on-screen keyboard or the remote control keypad to enter the
name.
Network Settings and press
26