TimeLapse BFC100- Self-Portrait Camera BFC100 Quick Guide w w w . b r i n n o . c o m...
Page 2
Self-Portrait Camera BFC100 TimeLapse Camera Self-Portrait Mirror & Shutter Line (TLC200 f1.2) (ATS110) BFC100 - Installation STEP 1. Install the Self-Portrait Mirror. Attach the magnetic holder onto the camera lens ring as shown in the illustration. STEP 2. Install the Shutter Line.
Page 3
Stop Motion & Output Folder To record any event that changes over time, it is recommended to specify the Output Folder (File A /File B / File C / File D). - Select a different folder to store captured shots based on its category (i.e.
STEP 5. Start Recording To capture a shot, press the shutter button for 1 second to snap and wait for 5 seconds before capturing the second shot. To maintain the same position, remember to keep the same Capture Distance everytime you capture a shot. The Red Led indicator blinks when it is recording.
4 AA Batteries/DV IN: 5V (Micro USB connector) Memory Storage SD Card (Support up to 32 GB) Image Format JPEG, 1280x720 Focus Distance 30 cm (minimum) 7F, No.75, Zhou Zi St., Taipei City11493, Taiwan Phone: +886-2-8751-0306 Fax: +886-2-8751-0549 customerservice@brinno.com www.brinno.com Made in Taiwan 301-0055-00 EN A1...
Need help?
Do you have a question about the BFC100 and is the answer not in the manual?
Questions and answers