Table of Contents
Advertisement
Phonebook
Problem
I cannot store an item in
the phonebook.
While storing an item in
the phonebook, the unit
starts to ring.
The display exits the
phonebook while
searching.
Caller ID
Problem
The unit does not display
the caller's phone
number.
The display exits the
caller list while searching.
Power failure
Problem
The unit will not function.
Cause & solution
L You cannot store an item in the phonebook while the
unit is in speakerphone mode, or while listening to
recorded conversations.
L Do not pause for over 1 minute while storing.
L A call is being received. Answer the call and start again
from the beginning after a call is finished.
L The unit automatically exits after 1 minute of inactivity.
Cause & solution
L You have not subscribed to Caller ID service. Contact
your telephone service provider to subscribe.
L If your unit is connected to any additional telephone
equipment such as Caller ID box or wireless telephone
jack, disconnect the unit from the equipment and plug
the unit directly into the wall jack.
L If your unit is connected to a telephone line with ADSL
service, we recommend connecting a noise filter
between the unit and the telephone line socket
(page 8). Contact your ADSL provider for details (For
Australian users).
L Your unit is connected to a telephone line with ADSL
(JetStream) service. We recommend that you contact
your ADSL service provider to have an ADSL Splitter
installed. We do not recommend the use of generic
ADSL filters. Contact your ADSL provider for details
(For New Zealand users).
L Other telephone equipment may be interfering with this
unit. Disconnect the other equipment and try again.
L The caller requested not to send caller information
(page 17).
L The unit automatically exits after 1 minute of inactivity.
Cause & solution
L This product is not designed to make calls in the event
of a power failure.
Useful Information
31
Advertisement
Table of Contents
