Preparation; Connections - Panasonic KX-TS730AZ Operating Instructions Manual

Connections

Fasten the
interface cable.
Note:
L Use only provided Panasonic AC adaptor PQLV206AL (9V/750 mA) for proper product
operation. In case of power outage, this product will not work.
L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel
warm during use.)
L The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
L The unit will not work during a power failure. We recommend connecting a standard
telephone to the same telephone line or to the same telephone jack using a telephone
double adaptor (for Australia) or a T-adaptor (for New Zealand).
L The unit is not designed to be used with rotary (pulse dialling) services.
To disconnect the interface
cable, pull out the cable
while pushing the tabs.
Fasten the AC adaptor
cord.
Bottom of the
Hooks
interface box
Interface cable
AC adaptor
OR
Telephone line cord
For New Zealand
To single-line telephone jack
Telephone line cord

Preparation

Interface box
To power outlet
(AC 220-240 V,
50/60Hz)
For Australia
To socket
7