Nexcom NEX 613 User Manual page 38

Chapter 3: BIOS Setup
Intel AMT Technology
®
This section is used to configure the AMT function.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
Intel AMT [Enabled]
BIOS Hotkey Pressed [Disabled]
MEBx Selection Screen [Disabled]
Hide Un-Config ME Confirm Prompt [Disabled]
MEBx Debug Message Output
[Disabled]
Un-Configure ME [Disabled]
Amt Wait Timer 0
Disable ME [Disabled]
ASF [Enabled]
Activate Remote Assistance Process [Disabled]
USB Configure [Enabled]
PET Progress [Enabled]
AMT CIRA Timeout 0
Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.
Intel AMT
®
Enables or disables Intel Active Management Technology.
®
BIOS Hotkey Pressed
Enables or disables BIOS hotkey pressed.
MEBx Selection Screen
Enables or disables MEBx selection screen.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
Hide Un-Configure ME Confirm Prompt
Hide Un-Configure ME without password confirmation prompt.
MEBx Debug Message Output
Enables or disables MEBx debug message output.
Enable/Disable Intel (R)
Active Management Technology
Un-Configure ME
BIOS Extension.
Note : iAMT H/W is always
Enables or disables Un-configure ME without password.
enabled.
This option just controls the
BIOS extension execution.
If enabled, this requires AMT Wait Timer
additional firmware in the SPI
Set timer to wait before sending ASF_GET_BOOT_OPTIONS.
device
Disable ME
Set ME to Soft Temporary Disabled.
→←: Select Screen
↑↓: Select Item
Enter: Select
ASF
+/-: Change Option
F1: General Help
Enables or disables alert specification format.
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit
Activate Remote Assistance Process
Enables or disables Trigger CIRA boot.
USB Configure
Enables or disables USB configure function.
PET Progress
Enables or disables PET Events progress to receive PET event.
24
NEX 613 User Manual