Alternative Route Function - Mercedes-Benz COMAND Operator's Manual

Route Guidance
82
announcement, press and hold the B
button.
You will briefly see the message: The
driving instructions have been
muted.
X
To switch navigation announcements
back on manually: Select Navi£6.
or
X
Select 6 in map view with the menu
system displayed.
or
X
Start a new route calculation (
or
X
If COMAND is switched on again or the
engine is restarted.
X
To set the volume of the
announcements: Set the volume during
the automatic announcement (
or
X
Call up an announcement manually using
Navi£6 and adjust the volume.
Canceling Route Guidance
X
In the map display with the menu system
page 52) select Destination
displayed ( Y
£Cancel Route Guidance.
Resuming Route Guidance
X
Select Destination£Continue Route
Guidance in map view with the menu
system displayed.
COMAND calculates the route.
Detour Function
i The Detour function blocks a route
segment ahead. You can set the length of
the block. COMAND calculates a detour
route if possible.
X
Select Route£Detour in map view with
the menu system displayed (
X
To set the length of block: Select
Longer or Shorter repeatedly until the
required length is set.
The blocked segment is highlighted in red/
white on the map. Shown at the top of the
display is the length of the blocked
segment and the route segment to which
the block goes.
X
To cancel the function: Select Back.
X
To start route calculation: Select Start,
see also (
X
To change a block: Select Navi£Route
Y page 66).
£Detour£Change.
i If a block already exists, the message
Detour Already Set is displayed. You
can then change or delete this.
X
Then set length of block.
Y X
page 31).
To delete block: Select Navi£Route
£Detour£Delete.
i
If a block already exists, the message
Detour Already Set is displayed. You
can then change or delete this.
Alternative Route
i You can have other routes calculated for
the original route guidance using the

Alternative Route function.

X
In the map display with the menu system
displayed (
£Alternative Route.
The display is split into two halves. On the
left is the map, which displays one or more
alternative routes between the start and
the destination. The current route is
highlighted in dark blue, other alternative
routes are light blue.
The right side of the display shows
information on the active alternative route,
Y page 52).
Y page 66).
page 52) select Route
Y