Dtmf Tone Transmission - Mercedes-Benz COMAND Operator's Manual

Making Calls
102
X
To delete an entire phone number:
Select õ and press n until the phone
number has been deleted.
or
X
Press and hold down the 2 button next
to the COMAND controller until the entire
entry is deleted.
X
To connect a call: Select ° at the bottom
right-hand side of the speller.
or
X
Press the K button on the COMAND
control panel or the 6 button on the
multifunction steering wheel.
Redialing
X
Open the phone main menu (
X
Select ° at the bottom right-hand side of
the speller.
or
X
Press the K button on the COMAND
control unit when the phone main menu is
displayed.
The dialed calls list appears. The call dialed
last will be at the top of the list.
X
To select a call: Rotate
qmr
X
To initiate call: Press n.
Initiating a Call to a Call List Entry or
COMAND Phone Book Entry
X
Call up a call list and select an entry
( Y page 98).
or
X
Open the COMAND phone book and select
an entry ( Y page 95).
X
To initiate call: Press n.
Phone mode with a single call
1
2
3
Y page 94).
4
5
6
or Off
X
or slide
ymz
X
X
i
Answering machines or other devices can be
controlled by DTMF tones, e.g. for remote
query functions.
Functions During a Single Call
Other party
Symbol for active phone connection
Switches the hands-free microphone off
or on
Sends DTMF tones (not possible with all
mobile phones)
Device name of the connected mobile
phone
Terminates call
Switching Hands-Free Microphone On
Open the phone main menu (
To switch off: Select Mic Off.
If the microphone is switched off, the >
icon appears in the main area.
To switch on: Select Mic On.
The > symbol disappears.

DTMF Tone Transmission

This function is not possible with all
mobile phones.
Y
page 94).