Switching Comand On/Off - Mercedes-Benz COMAND Operator's Manual

Basic Functions of COMAND
30
X
To select FM/AM Radio: Rotate
slide qm.
X
To confirm selection: Press n.
The radio main display appears.
Tuning to a Station Manually
X
Slide to highlight the lower menu bar.
mr
X
Rotate or slide
ymz
or WB.
X
Tune to a staion by rotating
omp.
The red line (tuning indicator) moves right
or left and stops when a receivable station
is found.
Basic Functions of COMAND
i
The COMAND components can be found
on page ( Y page 14). Operating examples
can be found on (
ymz
to select FM, AM
omp
or sliding
ymz
Y page 26).

Switching COMAND On/Off

X
Press the q button.
The cover folds open and the COMAND
display extends. A warning message
appears. COMAND calls up the previously
selected menu.
i If you switch off COMAND, playback of
the current audio or video source will also
be switched off.
or
Sound
X
To switch on/off: Press the B button.
The sound from the active audio or video
source is switched on or muted.
i When the sound is muted, you will see the
X icon in the status bar.
If you change the audio or video source or
change the volume, the sound is
automatically switched on again.
i Announcements from the navigation
system can still be heard with the sound
switched off.
Switching Navigation Announcements
On/Off
X
Press B during the announcement.
i
The navigation announcements are
switched on again if you start a new route
guidance or if COMAND is switched off and
on with the q button.
Setting the Volume
X
To set: Turn the q rotary/push button.
or
X
Press the W or X button on the multi-
function steering wheel.
The volume of the selected audio or video
source changes.