Reset; Language Setting; Switching On/Off - Mercedes-Benz COMAND Operator's Manual

Switching On/Off the Display of the
Rear View Camera
X
Switch to System Menu
System settings menu with Rear View Camera
option
X
Select Settings£Rear View Camera.
X
Select Activation by R gear.
Depending on the previous state the
function is switched on Ç or offc.

Reset

i You can fully reset COMAND to the
factory settings. This process deletes all
personal data, among other things, (e.g.
station memory, address book entries,
entries in the destination memory and in
the last destinations of the navigation
system). It is recommended that you
perform a reset before the vehicle is
handed over or sold, for example.
X
Select System£Settings£Reset.
A prompt appears asking whether you wish
to reset.
X
Select Yes or No.
If you select Yes, a prompt will appear again
asking whether you really wish to reset.
X Select Yes or No.
If you select Yes, a message will be shown.
COMAND is reset and restarted.

Language Setting

Language Setting
This function allows you to determine the
language for the menu displays and the
navigation messages. The language selection
affects the input options in the editing and
smart speller.
X
Select System£Language.
The list of languages appears. The R dot
indicates the current setting.
X
To select a language: Rotate
qmr.
The selection moves up and down.
X
To confirm the language selection:
Press n.
COMAND loads the selected language and
sets it.
i If you change the system language, the
language for Voice Control will be also be
changed. If the selected language is not
supported by the Voice Control system,
"English" will be selected.
43
or slide
ymz
Z