Rinnai FC510N User Manual page 10

Installation Instructions
•
Do not unplug the appliance while it is operating or while the fan is on.
•
Do not use a plug in type timer with this appliance.
•
Do not install in a windy area such as facing a window or a door leading to the outside.
•
Do not recess this appliance or mount it directly in a wall
•
If the flooring is carpet, tile, or other combustible material other than wood, then the appliance
must be installed on a metal or wood panel extending the full width and depth of the appliance.
•
This appliance discharges a large volume of warm air next to the floor. Any particles in the air
such as cigarette smoke, lint, dust, or debris could cause discoloration in nylon carpets
containing dyes or vinyl surfaces.
•
Rinnai suggests that a dedicated electrical circuit with a 120VAC, 60 hz, 10 amp power source be
used.
•
The flow of combustion and ventilation air shall not be obstructed.
•
Note that in some regions, an unvented gas heater will increase the amount of humidity in the
room.